Pneumatic diaphragm high-pressure angle-type control valves adjust the flow cross-sectional area by altering the signal pressure, thereby modifying the medium flow rate to regulate required parameters such as pressure, flow, temperature, and liquid level.
Pneumatic Diaphragm High-Pressure Angle-Type Control Valve Technical Specifications
| Nominal Diameter (mm) | 6 | 10 | 15 | 25 |
|---|
| Seat diameter(mm) | 3 | 4 | 6 | 4 | 5 | 7 | 8 | 10 | 6 | 7 | 8 | 10 | 12 | 7 | 8 | 10 | 12 | 16 | 20 |
| Flow coefficient Kv | 0.04 | 0.1 | / | 0.1 | 0.4 | / | / | / | 0.4 | / | / | / | / | 1 | 1.6 | 2.5 | 4 | 6.3 | 8 |
| / | 0.16 | 0.4 | 0.16 | / | 1 | 1.6 | 2.5 | 0.63 | 1 | 1.6 | 2.5 | 4 | / | / | / | / | / | / |
| 0.063 | 0.25 |
| 0.25 | 0.63 | / | / | / | / | / | / | / | / | / | / | / | / | / | / |
| Nominal Diameter(mm) | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 |
| Seat diameter(mm) | 16 | 20 | 30 | 20 | 38 | 30 | 50 | 38 | 65 | 50 | 80 | 65 | 100 | 65 | 125 | 100 | 150 | 125 | 200 |
| Flow coefficient | 6.3 | 8 | 16 | 8 | 25 | 16 | 40 | 25 | 63 | 40 | 100 | 63 | 160 | 100 | 250 | 160 | 400 | 250 | 600 |
| Adjustable range | When Kv value < 18, R = 20:1; When Kv value > 18, R = 30:1 |
| Nominal Pressure | 16, 22, 32 MPa |
| Valve Core Type | Sleeve-guided single-seat plunger-type valve core |
| Flow Characteristics | straight line |
| Mode of action | Normally open, normally closed |
| Operating Temperature | Standard Type: -40°C to 230°C; Heat Sink Type: 230°C to 450°C; Special Order: 450°C to 600°C |
| Flange Standard | Complies with JB/T2769-92 standard; can be ordered and manufactured according to ANSI, JIS, DIN, etc. |
| Executive body | ZHA/B Type Multi-Spring Pneumatic Diaphragm Actuator |
| Compatible with accessories | Positioner, solenoid valve, air filter regulator, limit switch, valve position feedback device, emergency operating device, handwheel mechanism, etc. |
Tianjin Yibiao Valves Main Products: